Honda Pilot - Honda Pilot Forums banner

Aftermarket ARMRESTS are finally here!! - order away

177003 Views 244 Replies 78 Participants Last post by  PlentyOHondas
Okay so if you have been on this 3rd generation for any period of time you probably know that for the last 15 months or so I've been talking about getting an aftermarket arm rest for us.

Just in case you haven't been following these threads: and

I will remind you that the Touring and Elite have ratcheting armrests on both drivers and passengers sides. The EX/EX-L has a ratcheting armrest on the drivers side only and the LX has only flip up/down armrests on both sides. There are 3 different colors of leather as well as cloth and it has certainly taken some time to tweak this aftermarket armrest.

I will spare you the specifics on the ideas that Jim and I bounced around but as a final product the armrest will be able to ratchet. Each ratcheting armrest will be able to be installed in under one minute. Pull out the old one and pop in the new one. The non-ratcheting armrests will take about 3-5 minutes to install. Really a piece of cake.

The thing that has been holding this project back is the funding as it costs quite a bit to fabricate the "sprocket" to allow the armrest to ratchet. Piloteers have asked to have it ratchet and your request has been answered. I'm going to attach a link to the pre-order form. I say pre-order because it will take about 6 weeks to get your armrest because each one has to be custom made. Rest assured you will get your armrest.

Here is a link to the pre-order form: Honda Pilot & Ridgeline Armrest Order Form

I would like thank everyone for their patience throughout the process and remind you that I have zero financial incentive in this product. I just want to replace the toothpick armrest.
See less See more
  • Like
Reactions: 5
1 - 2 of 245 Posts
I checked the link for the order form and its offline? Are these still being made?
1 - 2 of 245 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.