Honda Pilot - Honda Pilot Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
during a big freeze i slid into a stop sign and damaged my condenser line to the evap. it eventually wore clean through the aluminum line by rubbing on the side of the condenser. i found some splice kits but idk what size the line is. measured 8mm on caliper but i cant find anything to confirm that as the caliper also read 5/16 (i suck with conversions. sue me). does anyone know the od size of the line, where to find a splice kit for that small of a line, or have any tips on fixing the line? i dont want to pull the entire line but if thats what its gonna take i will. cant find a for sure replacement line either. if there are any details im missing please lmk.
 
1 - 1 of 1 Posts
Top