Followed the instructions for my 2008 EX-L Pilot.
Quote:
Originally Posted by Armystrong
I lifted the GB up in order to unscrew the bolt. This step can also be done prior to cutting the plastic mold off.
 |
My vehicle required the 8mm socket for this step.
Quote:
Originally Posted by Armystrong
Once you have removed the phillips head bolt and the 8mm bolt from the left side, do the same to the right side allowing you to move the metal brace down on the left side.
 |
It took me a long time to figure out how to dislodge and rotate the metal brace. For my vehicle there are tabs on the metal brace that prevent the brace from rotating vertically. I had to pull the brace towards the interior of the cabin to get the tabs to clear their mounts, and only then was I able to rotate the brace down as shown in the picture.