Honda Pilot - Honda Pilot Forums - View Single Post - DIY VTM-4 (differential) Fluid change with pictures

Gullwing · 11-09-2006, 07:56 AM

Sunday Rider,

I didn't have a chance to get underneath last night - too much water on the ground from a rain. The tubing in the picture looks too thick compared to what I saw. The internal diameter was about 1/16-in, and there were actually two rubber-like tubes that were held in parallel with a clip. Will try again tonight for a photo.

Thanks for the picture reference. I'll look for that vent tube, too.

11-09-2006, 07:56 AM	#49 (permalink)
Gullwing Junior Member Join Date: Nov 2004 Location: New England Posts: 14	Sunday Rider, I didn't have a chance to get underneath last night - too much water on the ground from a rain. The tubing in the picture looks too thick compared to what I saw. The internal diameter was about 1/16-in, and there were actually two rubber-like tubes that were held in parallel with a clip. Will try again tonight for a photo. Thanks for the picture reference. I'll look for that vent tube, too.