Quote:
Originally posted by hondaman2
put the new filter back in and put everything back together in reverse order. The left 8mm bolt will be a little tough to start, so I use a socket without the ratchet and pull the plastic back with my other hand.
|
Thank you so much Hondaman2 for the step by step directions. It took me about 45 minutes to do the job. The screw on the outside that holds the glove box is a pain to put back in since there was wires there and hard to get the ratchet in straight. I ended up putting the screw in crooked so I had to remove the clip and rethread the screw into the clip a few times before putting it back again and it went in straight. I got a Purolator filter for $22 but it does not look anywhere near the quality of the Honda one. Next time I will definitely buy the Honda brand. I plan to change every 15k anyways.